phone [408] 946-1968 ? fax [408] 946-1960 ? hirel. sales@skyworksinc.com ? www.skyworksinc.com 203250d ? isolink proprietary information ? products and pro duct information are subject to ch ange without notice. ? jul y 10, 2017 1 data sheet apd series: hermetic ceramic packaged silicon pin diode devices applications ? switches ? attenuators features ? established pin diode process ? low capacitance designs ? voltage ratings to 200 v ? tight control of i layer base width description the isolink apd series of silicon pin diodes are designed for use as switch and attenuator devices in high-performance rf and microwave circuits. the pin diode designs are useful over a wide range of frequencies from below 100 mhz to beyond 20 ghz. these devices use a well-established silicon technology resulting in pin diodes with tightly controlled i-region characteristics. the low capacitance and low resistance of the apd0505 through apd1520 diodes are ideal for switch applications that require insertion loss and fast switching speed. for switch or attenuator applications requiring high power and low distortion, the thick i- region and high reverse breakdown voltage of the apd2220 is ideal. the absolute maximum ratings of the apd diode series are provided in table 1. electrical specifications are provided in table 2. typical performance characteristics are provided in figures 1 through 6. downloaded from: http:///
data sheet ? apd series: hermetic ceramic packaged silicon pin diode devices phone [408] 946-1968 ? fax [408] 946-1960 ? hirel. sales@skyworksinc.com ? www.skyworksinc.com 203250d ? isolink proprietary information ? products and pro duct information are subject to ch ange without notice. ? jul y 10, 2017 2 table 1. apd series absolute maximum ratings 1 parameter symbol minimum typical maximum units power dissipation p dis case to junction j ce tan sis re thermal temp case t maximum ?? ? w reverse voltage v r see voltage rating column in table 2 v forward current i f 200 ma operating temperature t op C65 +175 ? c storage temperature t stg C65 +200 ? c 1 exposure to maximum rating conditions for extended periods may reduce device reliability. there is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. exceeding any of the limit s listed here may result in permanent damage to the device. esd handling : although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this device must be protected at all times from esd when handling or transporting. static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd handling precautions should be used at all times. table 2. apd series electrical specifications 1 (1 of 2) (t op = +25 ? c, unless otherwise noted) part number total capacitance (c t ) @ 50 v, (pf) total capacitance (c t ) @ 0 v, (pf) series resistance (r s ), @ 10 ma, ( ) minority carrier lifetime (t l ) @ 10 ma (ns) voltage rating 2 (v) i-region thickness ( m) thermal resistance ( jc ) ( ? c/w) maximum typical maximum typical minimum nominal maximum switching applications apd0505-203 0.30 0.35 2.5 70 50 5 232 apd0505-210 0.30 0.35 2.5 70 50 5 133 apd0505-219 0.30 0.35 2.5 70 50 5 201 apd0505-240 0.30 0.35 2.5 70 50 5 214 apd0510-203 0.35 0.40 1.5 90 50 5 189 apd0510-210 0.35 0.40 1.5 90 50 5 90 apd0510-219 0.35 0.40 1.5 90 50 5 158 apd0510-240 0.35 0.40 1.5 90 50 5 170 apd0520-203 0.40 0.45 1.0 120 50 5 167 APD0520-210 0.50 0.55 1.0 120 50 5 59 apd0520-219 0.40 0.45 1.0 120 50 5 136 apd0520-240 0.40 0.45 1.0 120 50 5 148 apd0805-203 0.30 0.35 2.0 100 100 8 201 apd0805-210 0.35 0.40 2.0 100 100 8 107 apd0805-219 0.30 0.35 2.0 100 100 8 170 apd0805-240 0.30 0.35 2.0 100 100 8 182 downloaded from: http:///
data sheet ? apd series: hermetic ceramic packaged silicon pin diode devices phone [408] 946-1968 ? fax [408] 946-1960 ? hirel. sales@skyworksinc.com ? www.skyworksinc.com 203250d ? isolink proprietary information ? products and pro duct information are subject to ch ange without notice. ? jul y 10, 2017 3 table 2. apd series electrical specifications 1 (2 of 2) (t op = +25 ? c, unless otherwise noted) part number total capacitance (c t ) @ 50 v, (pf) total capacitance (c t ) @ 0 v, (pf) series resistance (r s ), @ 10 ma, ( ) minority carrier lifetime (t l ) @ 10 ma (ns) voltage rating 2 (v) i-region thickness ( m) thermal resistance ( jc ) ( ? c/w) maximum typical maximum typical minimum nominal maximum switching applications (continued) apd0810-203 0.35 0.40 1.5 160 100 8 174 apd0810-210 0.40 0.45 1.5 160 100 8 75 apd0810-219 0.35 0.40 1.5 160 100 8 143 apd0810-240 0.35 0.40 1.5 160 100 8 155 apd1505-203 0.40 0.45 @ 10 v 2.5 350 200 15 172 apd1505-210 0.40 0.45 @ 10 v 2.5 350 200 15 74 apd1505-219 0.40 0.45 @ 10 v 2.5 350 200 15 142 apd1505-240 0.40 0.45 @ 10 v 2.5 350 200 15 150 apd1510-203 0.35 0.40 2.0 300 200 15 168 apd1510-210 0.35 0.40 2.0 300 200 15 70 apd1510-219 0.35 0.40 2.0 300 200 15 137 apd1510-240 0.35 0.40 2.0 300 200 15 149 apd1520-203 0.40 0.45 1.2 900 200 15 155 apd1520-210 0.40 0.45 1.2 900 200 15 57 apd1520-219 0.45 0.50 1.2 900 200 15 124 apd1520-240 0.40 0.45 1.2 900 200 15 136 attenuator applications apd2220-203 0.45 0.50 4.0 100 100 50 132 apd2220-210 0.45 0.50 4.0 100 100 50 32 apd2220-219 0.40 0.45 4.0 100 100 50 104 apd2220-240 0.40 0.45 4.0 100 100 50 115 1 performance is guaranteed only under the conditions listed in this table. 2 reverse current is specified at 10 a maximum at the voltage rating note d. do not exceed this voltage. downloaded from: http:///
data sheet ? apd series: hermetic ceramic packaged silicon pin diode devices phone [408] 946-1968 ? fax [408] 946-1960 ? hirel. sales@skyworksinc.com ? www.skyworksinc.com 203250d ? isolink proprietary information ? products and pro duct information are subject to ch ange without notice. ? jul y 10, 2017 4 typical performance characteristics at 25 c re s i s tance ( ) forward c urrent (ma) 0.1 1 10 100 1000 0.01 0.1 1 10 100 apd0505-000 apd0510-000 apd0805-000 203250-001 figure 1. resistance vs forward current @ 1 ghz 25 50 75 100 125 150 175 maximum c w input power (w) c a s e temperature ( c ) 203250-003 0 20 40 6 0 80 100 120 apd0505apd0510 apd0520 apd0805 apd0810 apd1505 apd1510 apd1520 apd2220 figure 3. maximum cw input power vs case temperature (-210 package) 25 50 75 100 125 150 175 maximum c w input power (w) c a s e temperature ( c ) 203250-005 0 5 10 15 20 25 30 35 apd0505apd0510 apd0520 apd0805 apd0810 apd1505 apd1510 apd1520 apd2220 figure 5. maximum cw input power vs case temperature (-219 package) re s i s tance ( ) forward c urrent (ma) 0.1 1 10 100 1000 0.01 0.1 1 10 100 apd0810 apd1510 apd2220 203250-002 figure 2. resistance vs forward current @ 1 ghz 25 50 75 100 125 150 175 maximum c w input power (w) c a s e temperature ( c ) 203250-004 0 5 10 15 20 25 30 apd0505apd0510 apd0520 apd0805 apd0810 apd1505 apd1510 apd1520 apd2220 figure 4. maximum cw input power vs case temperature (-203 package) 25 50 75 100 125 150 175 maximum c w input power (w) c a s e temperature ( c ) 203250-00 6 0 5 10 15 20 25 30 35 apd0505apd0510 apd0520 apd0805 apd0810 apd1505 apd1510 apd1520 apd2220 figure 6. maximum cw input power vs case temperature (-240 package) downloaded from: http:///
data sheet ? apd series: hermetic ceramic packaged silicon pin diode devices phone [408] 946-1968 ? fax [408] 946-1960 ? hirel. sales@skyworksinc.com ? www.skyworksinc.com 203250d ? isolink proprietary information ? products and pro duct information are subject to ch ange without notice. ? jul y 10, 2017 5 package outline drawings hermetic package outline dimension drawings are shown in figures 7 through 10. 0.050 (1.27 mm)0.040 (1.02 mm) 0.055 (1.40 mm)0.051 (1.30 mm) dia. s chematic n-type 203250-007 12 12 dimensions are in inches (millimeters shown in parentheses) figure 7. -203 package 0.025 (0.63 mm) max. 0.124 (3.15 mm) 0.119 (3.02 mm) dia. 0.097 (2.46 mm)0.083 (2.11 mm) 0.083 (2.11 mm)0.077 (1.95 mm) 0.064 (1.63 mm)0.060 (1.52 mm) 0.225 (5.72 mm)0.205 (5.21 mm) 0.064 (1.63 mm)0.060 (1.52 mm) 2 places 203250-008 schematic 12 12 dimensions are in inches (millimeters shown in parentheses) figure 8. -210 package downloaded from: http:///
data sheet ? apd series: hermetic ceramic packaged silicon pin diode devices phone [408] 946-1968 ? fax [408] 946-1960 ? hirel. sales@skyworksinc.com ? www.skyworksinc.com 203250d ? isolink proprietary information ? products and pro duct information are subject to ch ange without notice. ? jul y 10, 2017 6 203250-00 9 ver s ion a ver s ion b 0.075 (1. 9 1 mm) 0.0 6 5 (1. 6 5 mm) s q. 0.045 (1.14 mm)0.030 (0.7 6 mm) 1 c athode 2 12 0.020 (0.51 mm) typ. 0.033 (0.84 mm) min. 0.010 (0.25 mm) ref. s chematic dimensions are in inches (millimeters shown in parentheses) figure 9. -219 package downloaded from: http:///
data sheet ? apd series: hermetic ceramic packaged silicon pin diode devices phone [408] 946-1968 ? fax [408] 946-1960 ? hirel. sales@skyworksinc.com ? www.skyworksinc.com 203250d ? isolink proprietary information ? products and pro duct information are subject to ch ange without notice. ? jul y 10, 2017 7 c olored dot denote s c athode s chematic 0.022 (0.5 6 mm) 0.018 (0.4 6 mm) 0.175 (4.44 mm)0.125 (3.18 mm) 2 place s 0.0 9 8 (2.4 9 mm) 0.0 9 2 (2.34 mm) diameter c over c eramic 1 45 metal metal 0.005 (0.127 mm)0.003 (0.07 6 mm) 0.042 (1.0 6 mm) 0.028 (0.71 mm) 2 0.104 (2. 6 4 mm) 0.0 9 2 (2.34 mm) s q. 1 2 203250-010 dimensions are in inches (millimeters shown in parentheses) figure 10. -240 package downloaded from: http:///
data sheet ? apd series: hermetic ceramic packaged silicon pin diode devices phone [408] 946-1968 ? fax [408] 946-1960 ? hirel. sales@skyworksinc.com ? www.skyworksinc.com 203250d ? isolink proprietary information ? products and pro duct information are subject to ch ange without notice. ? jul y 10, 2017 8 copyright ? 2014, 2017 isolink, inc. all rights reserved. information in this document is provided in connection with isolink, inc. (isolink), a wholly-owned subsid iary of skyworks so lutions, inc. these materials, including the information contained herein, are provided by isolink as a service to its customers and may be used for informational purposes only by the customer. isolink assumes no responsibility fo r errors or omissions in these materials or the information contained herein. isolink may change its documentation, products, se rvices, specifications or prod uct descriptions at any time, wi thout notice. isolink makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. no license, whether express, implied, by es toppel or otherwise, is granted to any in tellectual property rights by this document . isolink assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of isolink products, in formation or materials, except as may be provided in isolink terms and conditions of sale. the materials, products and information are pr ovided as is without warranty of any kind, whether express, implied, statutory, or otherwise, including fitness for a particular purpose or use, merchantability, performance, qualit y or non-infringement of any intellectual property right; all su ch warranties are hereby expressly disclaimed. isolink does not warrant the accuracy or completeness of the informati on, text, graphics or other items contained w ithin these materials. isolink shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequential dama ges, including without limitation, lost revenues or lost profits that may result from the use of the materials or informati on, whether or not the recipient of material s has been advised of the possibility of such damage. customers are responsible for their products and applications using isolink products, which ma y deviate from published specific ations as a result of design defects, errors, or operation of products outside of published parameters or design sp ecifications. customers shou ld include design and operating safeguards to minimize these and other risks. isolink assumes no liability for applications assistance, customer product design, or dama ge to any equipment resulting from the use of isolink products outside of stated pu blished specifications or parameters. isolink is a trademark of isolink inc. in the united states and other countries. skywor ks and the skyworks symbol are trademark s or registered trademarks of skywor ks solutions, inc., in the united states and other countries. third-party bra nds and names are for identification purpose s only, and are the property of their re spective owners. downloaded from: http:///
|
